Payment & Shipping Terms:
|Product Name:||SMT Stencil Cleaning Machine||Other Name:||Pneumatic Stencil Cleaning Machine|
|Application:||For Cleaning Stencils, Steel Mesh, Matal Mesh||Cleaning Obejects:||Solder Paste, Red Glue, Flux, Sosin,etc.|
|Power Supply:||Compressor Air (4-6kg)||Stencil Size:||Standard,740*740*40mm, Customized Is Available|
|Machine Body:||Stainless Steel||Machine Weight:||305kg|
pcb cleaning equipment,
circuit board cleaning equipment
Standard Size 740x740mm Steel Mesh SMT Auto Aqueous Stencil Cleaning Machine
The machine (Model:HS-600) - pneumatic SMT stencil cleaning machine is designed for cleaning solder paste, red glue, flux, rosin, on the surface of the stencils after the printing of SMT process. The machine is powered by the compressor air, use air filter and transfer the filtered air to the spraying bar, and at the same time the air pressure will drive the pump, and the pump will siphon the cleaning solvent(alcohol) to the spray bar, so the solvent will spraying out to the stencils. The spraying bar is rotation spraying, that will make sure no cleaning dead corner. And after cleaning the spraying bar will spray the air to drying the stencils. The machine is automatic cleaning, with one-button operation, we put the stencils into the cleaning room, and set the cleaning and drying time, press the "start" button, then we wait the till the process finished.
1, The whole machine body is made of SUS304 stainless steel, durable and stable, that make sure the operating precision.
2, Full pneumatic operation, the machine is powered by the compressor air, no electricity, very safe.
3, Using the alcohol as the solvent, the machine equipped with the 3 level filter system,the solvent can use repeatly.
4, Easy operation, after set the parameter, press the button, then the cleaning and drying complete automatically.
5, Two sets cleaning bar 360 degree rotation cleaning, each side one bar, no cleaning dead corner.
6, All the pneumatic parts are using famous brand, ensure the quality in every details.
7, Easy maintenance, open the cover and the operator can change the filters easily.
|Power supply||Compressor air|
|Application||stencil,metal mesh, steel mesh,cooper screen,gule screen|
|Stencil size||standard 29inch and below,740*740*40mm|
|Cleaning liquid capacity||Max 45L,Min20L|
|Best cleaning fluid using volume||40L|
Rotary double side pressure injection and high pressure air
|Cleaning time||2~4 Min Stencil and Copper Screen|
|Drying time||2~5 Min|
|External air supply||0.4Mpa~0.6Mpa|
|Consumer air quantity||400~600L/Min|
|Air outlet size||φ125*25mm|
|Solder dross filter mode||3 level filter(10um,5um,1um)|
Contact Person: Mr. Rudi Jin