Stainless Steel Chip Mounter Nozzle Cleaner SMT Cleaning Equipment With A D.I Water Storing Tank

Stainless Steel Chip Mounter Nozzle Cleaner SMT Cleaning Equipment With A D.I Water Storing Tank

Introduce
Chip Mounter Nozzle Cleaner is a device or tool used to clean the nozzle of the chip mounter. In the electronics manufacturing process, the placement machine is used to accurately place electronic components onto the PCB, and the nozzle is a key component to remove the components from the feeder and place them accurately. Due to frequent use, the nozzle may be subject to various contaminations and requires regular cleaning to ensure the normal operation of the placement machine and high-quality component assembly.

The following is a general introduction to Chip Mounter Nozzle Cleaner:

Cleaning principle: Chip Mounter Nozzle Cleaner removes dirt, residue or blockage from the placement machine nozzle by using appropriate cleaning agents and mechanical operations. Cleaners can help dissolve and remove different types of contaminants, such as solder residue, glue, dust, etc. Mechanical operations can include spraying, brushing, vibration, etc. to ensure thorough and effective cleaning of the nozzle.

Equipment Features: Chip Mounter Nozzle Cleaner usually has some features such as multi-function cleaning mode, adjustable cleaning parameters, automated cleaning process and high efficiency. Some equipment also has a nozzle detection function, which can detect the status and cleaning effect of the nozzle and provide corresponding feedback information.

Cleaning effect: By regularly using Chip Mounter Nozzle Cleaner to clean the placement machine nozzle, you can ensure the good condition and performance of the nozzle and prevent component assembly quality degradation and production line failures. Cleaned nozzles enable accurate component pick-and-place, reduce error rates, and improve production efficiency.

Safety Precautions: When using Chip Mounter Nozzle Cleaner, you need to follow the operating instructions and safety precautions provided by the equipment manufacturer. Use appropriate cleaners and avoid damage to equipment and nozzles. In addition, equipment is regularly maintained and maintained to ensure its proper operation and long-term reliability.

Product Features

1, This nozzle cleaner work with pure compressor air as power, using D.I water as solvent, cleanness and not harmful.

2, The whole process including cleaning and drying, ensure the nozzles can be reuse quickly.

3, Elegant white color for the machine surface, control panel at the right side, good appearance.

4, Light display for the machine status.

5, Equip with a D.I water storing tank, with a cover at the top side, also with water level scale display.

6, Transprent cover window, can fully watching the cleaning process.

7, Safety protect, alarm function when cleaning and drying is finished. Also with emergency stop button control and electricity overload protection.

8, Touch screen panel control, easy to learn and understand.

9, One button operation, after set the cleaning time and drying time, press the start button to start, and wait till it finished.

10, Low working noise.

Specification

SMT Nozzle Cleaner Equipment principles and uses

By breaking up the water, extremely fine water mist is produced, which is sprayed onto the suction nozzle with powerful kinetic energy at supersonic speed, forming a continuous energy field above the suction nozzle to be cleaned, crushing dirt on the surface and inside. Independent cleaning, no damage to the suction nozzle. Using this device for daily nozzle maintenance and cleaning work can achieve a thorough cleaning effect in a safe state. It reduces the scrapping cost of nozzles caused by traditional cleaning methods, extends the life of nozzles, and plays a vital role in the maintenance of the placement machine to ensure that the placement machine operates in a better condition.

About Packaging